• Lift, lower and tilt for the perfect picture and comfortable viewing
• Display/TV moves with only a light touch with patented CF™ technology
• Discreet mounting hardware nearly disappears
• Raise TV during standing activities
• Display stays close to the wall, out of the way; mount depth is 2″ (5 cm)
• Easy to use—simple installation and effortless operation
• Ratchet-free tilting

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
30″ – 55″ †	20–40 lbs 9.1–18.1 kg	18″ 45.7 cm	10°	–	–	MIS-E/F*	5 years

• Part Number: 61-061-085
• Description: Glide Wall Mount, HD, Heavy Duty (black)
• Includes low-profile lift module, mounting template, tilt brackets, installation and mounting hardware, cable management hardware
• † Screen Size is approximate only. Use Display Weight and VESA hole pattern to determine compatibility, i.e., stated screen size may be exceeded as long as display weight does not exceed weight capacity
• Glide Wall Mount will be hidden behind display in most cases when used with screen size of 46″ or greater; when used with screens smaller than 46″, the mount may be visible
• * Mounting holes must fit within spacing range below:
  Horizontal = 200 mm (min.) to 400 mm (max.)
  Vertical = 100 mm (min.) to 400 mm (max.)
• Distance from wall to back of display = 2″ (5 cm)
• Shipping Weight: 32.25″ x 18″ x 5″ (82 x 46 x 12.5 cm)
• Shipping Weight: 30 lbs (13.5 kg)
• Warranty: Five (5) years

The post Glide Wall Mount, HD appeared first on PT Murni Solusindo.

• Low 0.5″ (13 mm) mounting profile
• Lift n’ Lock™ allows you to easily attach your flat panel to the mount
• Locking system secures panel to mount
• Simple to install and use
• Includes complete hardware kit
• Small form factor keeps mount discrete and unseen

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
13″ – 32″ †	≤40 lbs ≤18.1 kg	–	–	–	–	MIS-D/E/F *	3 years

• Part Number: 97-589
• Description: Neo-Flex Wall Mount, ULD, Ultra Light Duty (black)
• Includes wall plate, VESA adaptor, installation and attachment hardware
• † Screen Size is approximate only. Use Display Weight and VESA hole pattern to determine compatibility, i.e., stated screen size may be exceeded as long as display weight does not exceed weight capacity
• * VESA Monitor Attachment: 75 x 75 mm, 100 x 100 mm, 200 x 100 mm, 100 x 200 mm or 200 x 200 mm
• Profile off the wall = .5″ (13 mm)
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Shipping Dimensions: 11″ x 6″ x 1.3″ (279 x 152 x 32 mm)
• Shipping Weight: 1.6 lbs (.7 kg)
• Warranty: Three (3) years

The post Neo-Flex® Wall Mount, ULD appeared first on PT Murni Solusindo.

• Extends up to 18.8″ (48 cm) from wall. Minimum profile is just 3.8″ (10 cm)
• Sliding lateral adjustment of 2.9″ (7.4 cm)
• Tilt and pan for maximum viewing flexibility
• Includes universal adapter for greater panel compatibility
• Integrated cable management guides and hides cords
• Lift n’ Lock™ allows you to easily attach your flat panel to the mount
• Open frame provides ample room for power and A/V cutouts behind TV
• Built-in screen leveling

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≥37″ †	≤120 lbs ≤54.4 kg	–	16°	180°	–	MIS-F *	3 years

• Part Number: 61-132-223
• Description: Neo-Flex Cantilever Wall Mount, UHD, Ultra Heavy Duty (black)
• Includes wall plate, full motion arm, monitor plate, cable management, spider 46 adapter, complete installation hardware
• † Screen Size is approximate only. Use Display Weight and VESA hole pattern to determine compatibility
• * VESA Monitor Attachment: 200 x 200 mm to 600 x 400 mm
• Minimum profile = 3.8″ (97 mm); maximum extension = 18.8″ (478 mm)
• If adaptor is used, add .2″ (6 mm) to minimum profile and maximum extension
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Full compliance with RoHS directive
• Shipping Dimensions: 23.2″ x 12.8″ x 4.5″ (59 x 33 x 12 cm)
• Shipping Weight: 16.4 lbs (7.4 kg)
• Warranty: Three years

The post Neo-Flex® Cantilever, UHD appeared first on PT Murni Solusindo.

• Extends up to 14″ (36 cm) from wall. Minimum profile is just 3.2″ (8.2 cm)
• Tilt and pan for maximum viewing flexibility
• Includes adaptor for greater panel compatibility
• Integrated cable management and covers guide and hide cords
• Lift n’ Lock™ allows you to easily attach your flat panel to the mount
• Two-tone design and modern aesthetic complements newer panels
• Built-in flat screen leveling

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≤63″ †	≤80 lbs ≤36.3 kg	–	20°	180°	–	MIS-E/F *	3 years

• Part Number: 45-385-223
• Description: Neo-Flex Cantilever Wall Mount, VHD, Very Heavy Duty (black)
• Includes wall plate, cantilever arm, monitor plate, cable management, spider 46 adapter, complete hardware kit
• † Screen Size is approximate only. Use Display Weight and VESA hole pattern to determine compatibility, i.e., stated screen size may be exceeded as long as display weight does not exceed weight capacity
• * VESA Monitor Attachment: 200 x 100 mm to 600 x 400 mm
• Minimum profile = 3.2″ (82 mm); maximum extension = 14″ (357 mm)
• If adaptor is used, add .2″ (6 mm) to minimum profile and maximum extension
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Full compliance with RoHS directive
• Shipping Dimensions: 14.2″ x 12.8″ x 4.5″ (36 x 33 x 11 cm)
• Shipping Weight: 11 lbs (5 kg)
• Warranty: Three years

The post Neo-Flex® Cantilever, VHD appeared first on PT Murni Solusindo.

• Low 1.7″ (4.4 cm) mounting profile
• A universal TV wall mount: rails provide greater display compatibility
• Lift n’ Lock™ allows you to easily attach your flat panel to the mount
• Sliding lateral on-wall adjustment
• Open architecture provides easy access to in-wall wiring
• Locking bar secures panel to mount
• Simple to install and use
• Includes complete hardware kit

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≥37″	≤175 lbs ≤79.4 kg	–	–	–	–	MIS-D/E/F *	3 years

• Part Number: 60-614
• Description: Neo-Flex Wall Mount, UHD, Ultra Heavy Duty (black)
• Includes wall plate, two (2) fixed rails, locking bar, installation and attachment hardware
• * Mounting holes must fit within spacing range below: horizontal = 100 mm (min.) to 600 mm (max.); vertical = 100 mm (min.) to 400 mm (max.)
• Profile off the wall = 1.7″ (44 mm)
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Full compliance with RoHS directive is in progress
• Shipping Dimensions: 14.4″ x 33.9″ x 3.2″ (365 x 860 x 81 mm)
• Shipping Weight: 16.4 lbs (7.4 kg)
• Warranty: Three (3) years

The post Neo-Flex® Fixed Wall Mount, UHD appeared first on PT Murni Solusindo.

• Tilt range up to 20º to reduce glare
• A universal TV wall mount: rails provide greater display compatibility
• Lift n’ Lock™ allows you to easily attach your flat panel to the mount
• Tension adjustment for variable tilt
• Sliding lateral on-wall adjustment
• Open architecture provides easy access to in-wall wiring
• Locking bar secures panel to mount
• Simple to install and use
• Includes complete hardware kit

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
23″ – 42″ †	≤80 lbs ≤36.3 kg	–	20°	–	–	MIS-D/E/F *	3 years

• Part Number: 60-613
• Description: Neo-Flex Tilting Wall Mount, VHD, Very Heavy Duty (black)
• Includes wall plate, two (2) tilt rails, locking bar, installation and attachment hardware
• † Screen Size is approximate only. Use Display Weight and VESA hole pattern to determine compatibility, i.e., stated screen size may be exceeded as long as display weight does not exceed weight capacity
• * Mounting holes must fit within spacing range below: horizontal = 100 mm (min.) to 400 mm (max.); vertical = 100 mm (min.) to 300 mm (max.)
• Profile off the wall = 1.9″ (49 mm)
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Full compliance with RoHS directive is in progress
• Shipping Dimensions: 9.4″ x 20.4″ x 2.7″ (238 x 518 x 68 mm)
• Shipping Weight: 10.4 lbs (4.7 kg)
• Warranty: Three (3) years

The post Neo-Flex® Tilting Wall Mount, VHD appeared first on PT Murni Solusindo.

• Tilt range up to 15º to reduce glare
• A universal TV wall mount: rails provide greater display compatibility
• Lift n’ Lock™ allows you to easily attach your flat panel to the mount
• Tension adjustment for variable tilt
• Sliding lateral on-wall adjustment
• Open architecture provides easy access to in-wall wiring
• Locking bar secures panel to mount
• Simple to install and use
• Includes complete hardware kit

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≥37″	≤175 lbs ≤79.4 kg	–	15°	–	–	MIS-D/E/F *	3 years

• Part Number: 60-612
• Description: Neo-Flex Tilting Wall Mount, UHD, Ultra Heavy Duty (black)
• Includes wall plate, two (2) tilt rails, locking bar, installation and attachment hardware
• * Mounting holes must fit within spacing range below: horizontal = 100 mm (min.) to 600 mm (max.)
• Profile off the wall = 2.7″ (69 mm)
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Full compliance with RoHS directive is in progress
• Shipping Dimensions: 14.6″ x 33.9″ x 3.2″ (372 x 861 x 81 mm)
• Shipping Weight: 20.5 lbs (9.3 kg)
• Warranty: Three (3) years

The post Neo-Flex® Tilting Wall Mount, UHD appeared first on PT Murni Solusindo.

• Complete, fully integrated, all-in-one mounting system includes all components for installing large display digital signage solutions
• Simplifies digital signage installation with preassembled components; no need for additional equipment
• Flexible deployment options to accommodate your digital signage messaging and space requirements; portrait-to-landscape orientation, scalable for future hardware refreshes
• Easy, do-it-yourself portrait or landscape adjustment—no need to reinstall display; knobs are available for locking tilt orientation in place
• Security fasteners deter theft to protect your investment
• Conveniently attaches VESA-compliant (75 x 75 or 100 x 100 mm) thin client CPU to the back of the display
• Single SKU design fits most screens from 32″ and larger up to 105 lbs (47.6 kg)
• Cable management system conceals and organize cables
• Patented Constant Force™ motion technology

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≥32″	≤105 lbs ≤47.6 kg †	–	15° ‡	–	90° *	MIS-F **	5 years

Part Number: 60-600-009

Description: SIM90 Digital Signage Integration Mount (black)

Includes wall and display brackets, quick-release VESA-CPU mount/power brick bracket, hardware fastener kit

† Ideal for displays with screens size of 32″ and larger, and up to 105 lbs (47.6 kg). Total weight capacity is 115 lbs (52.2 kg): 105 lbs (47.6 kg) for display, 7 lbs (3.2 kg) for CPU, 3 lbs (1.4 kg) for cables and power brick

‡ Tilt: Smooth continuous display tilt range from 0° to 15° forward; Tilt range may be restricted when displays are in portrait mode

* Easily rotate display to either a portrait or landscape orientation without removing the display

** Mounting Hole Patterns: Horizontal measurement = 200 mm, 300 mm, 400 mm, 440 mm, 500 mm or 600 mm. Vertical measurement = 200 mm or 225 mm–400 mm

Portrait or landscape orientation may be dependant on content software or graphic card capabilities

Complete wall mount solution for digital signage applications

Easily attaches VESA-compliant (75/100 mm) thin client CPU: CPU must have either 75 x 75 mm or 100 x 100 mm mounting holes on one side

Maximum CPU size (W x H x D) = 13.5″ x 10″ x 2.6″ (34.3 x 25.4 x 6.6 cm), up to 7 lbs (3.2 kg). Power brick maximum weight = 3 lbs (1.4 kg)

Mounting Options: Includes hardware for mounting to wood studs (16″ centered studs) or concrete wall surfaces

Includes screws to secure display for theft deterrence

Display can be positioned at different points on the wall bracket; this lateral shift of the display’s position relative to the wall studs can be as much as 5.7″ (14.5 cm)

Profile off the wall: 4.8″ (12 cm)

Shipping Dimensions: 13.25″W x 12″H x 28.5″D (33.7 x 30.5 x 72.4 cm)

Shipping Weight: 24 lbs (11 kg)

Warranty: Five years

The post SIM90 Signage Integration Mount appeared first on PT Murni Solusindo.

• Installs in three simple steps
• Extremely slim profile—just over an inch (3 cm) from the wall
• Fits most screens up to 175 lbs (79 kg)
• Protect your investment: Integrated security fasteners hold display in place and deter others from removing your display
• Sturdy solid aluminum construction
• Includes fasteners for mounting to wood studs or concrete

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≥42” †	≤175 lbs ≤79.4 kg	–	–	–	–	MIS-D/E/F *	5 years

• Part Number: 60-602-003
• Description: WM Low Profile Wall Mount, XL (silver)
• Includes wall plate, two display brackets, hardware fastener kit
• Installation Options: Wall plate attaches to vertical surfaces. Includes hardware for mounting to wood studs (16″ or 24″ centered studs) or concrete walls
• * Mounting holes must fit within spacing range below: horizontal = 100 mm (min.) to 800 mm (max.); vertical = 100 mm (min.) to 450 mm (max.)
• † Fits most screens ≥ 42″. If used with screens < 42″, wall plate may be visible
• Premium Construction: Composed of extruded aluminum and steel
• Profile off the wall = 1.25″ (32 mm)
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Shipping Dimensions: 39.8″W x 10.4″H x 2.2″D (101 x 26 x 5.5 cm)
• Shipping Weight: 12 lbs (5.5 kg)
• Warranty: Five years

The post WM Low Profile Wall Mount, XL appeared first on PT Murni Solusindo.

• Installs in three simple steps
• Extremely slim profile—just over an inch (3 cm) from the wall
• Fits most screens up to 175 lbs (79 kg)
• Protect your investment: Integrated security fasteners hold display in place and deter others from removing your display
• Sturdy solid aluminum construction
• Includes fasteners for mounting to wood studs or concrete

Specifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≥32” †	≤175 lbs ≤79.4 kg	–	–	–	–	MIS-D/E/F *	5 years

• Part Number: 60-604-003
• Description: WM Low Profile Wall Mount (silver)
• Includes wall plate, two display brackets, hardware fastener kit
• Installation Options: Wall plate attaches to vertical surfaces. Includes hardware for mounting to wood studs (16″ centered studs) or concrete walls
• If mounting to wall using 24″ centered studs, order XL version (pt. # 60-602-003)
• * Mounting holes must fit within spacing range below: horizontal = 100 mm (min.) to 600 mm (max.); vertical = 100 mm (min.) to 450 mm (max.)
• For displays with horizontal hole pattern of 601–800 mm, order XL version (pt. # 60-602-003)
• † Fits most screens ≥ 32″. If used with screens < 32″, wall plate may be visible
• Premium Construction: Composed of extruded aluminum and steel
• Profile off the wall = 1.25″ (32 mm)
• UL certified and listed to UL Standard 2442. This product has been tested to hold four times its maximum load capacity per UL standard (do NOT exceed listed weight capacity in actual use)
• Shipping Dimensions: 33.3″W x 10.4″H x 2.2″D (84.5 x 26 x 5.5 cm)
• Shipping Weight: 10 lbs (4.5 kg)
• Warranty: Five years

The post WM Low Profile Wall Mount appeared first on PT Murni Solusindo.