• Helps create a solid connection when a mounting interface is recessed
• Compatible with monitors using a VESA 75 x 75 mm standard interface
• Simple installation

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
–	–	–	–	–	–	–	5 years

• Part Number: 97-501
• Description: Spacer kit for mounting to 75 x 75 mm recessed monitors (black)
• Includes one spacer and four Phillips pan head M4 x 25 mm screws
• Spacer depth = 9/16″ (14 mm)
• Shipping Dimensions: 7″ x 9″ (18 x 23 cm), self-mailer envelope
• Shipping Weight: 1.3 lbs (0.6 kg)
• Warranty: Five years

The post Spacer Kit for Recessed Display Interface appeared first on PT Murni Solusindo.

• Strengthens installation by distributing weight over a larger surface area
• The comprehensive hole pattern interfaces with several Ergotron wall-mount monitor arms and pivots
• Sturdy aluminum construction

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
–	–	–	–	–	–	–	5 years

• Part Number: 97-101-003
• Description: Wall Mount Plate (aluminum)
• Dimensions: 3.5″ x 8.38″ (90 x 213 mm)
• Compatible with LX, 400, 200 or 100 Series mounts
• Recommended for use with LX Arms when attaching to steel stud in wall
• Use caution if intending to attach to hollow wall without any connection to a stud. Because wall construction varies widely, it is recommended that you consult with appropriate engineering, architectural or construction personnel to ensure that the bracket is installed properly to handle applied loads. When attaching a monitor or keyboard mount to hollow wall, Wall Track is recommended
• Fasteners for attaching to wall not included
• Shipping Dimensions: 7″ x 9″ .25″ (178 x 229 x 7 mm)
• Shipping Weight: 1 lbs (.5 kg)
• Warranty: Five years

The post Wall Plate appeared first on PT Murni Solusindo.

• Optimized for dual-mounting of 24″ monitors
• Attaches to wide variety of mounts using a 50 x 50 mm, 100 x 100 mm or 200 x 100 mm hole pattern
• Robust design ensures many years of service
• Conceal and organize cables: Display cables can be neatly routed behind displays

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
22″ – 26″ *	≤36 lbs ≤16.3 kg †	–	–	–	360°	MIS-D	5 years

• Part Number: 97-718-009
• Description: Dual Monitor amd Handle Kit for Interactive Arm (black)
• Includes bow, two mounting brackets, handle, mounting hardware
• * Outside width of monitor should be 21″ to 24.5″ (53 to 62 cm). This range accommodates 23″ and 24″ displays as well as some displays with screens as small as 22″ or as large as 26″. If the outside width is less than 21″ (53 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5″ (62 cm) are not compatible
• † Combined weight of displays can be no more than 36 lbs (16.4 kg). This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5″ (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5″ (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity
• Specially designed for use with Interactive Arms (45-296-026 or 45-304-026) but will also attach to other mounts with four-hole interface of 50 x 50 mm, 100 x 100 mm or 200 x 100 mm
• Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• This kit can be installed and used without the included handle
• Product Dimensions: 4.6″H x 29.1″W x 1.5″D (11.7 x 74 x 38 cm)
• Shipping Dimensions: 31.5″ x 13.5″ x 7″ (80 x 34 x 17.5 cm)
• Shipping Weight: 9.2 lbs (4.2 kg)
• Warranty: Five years

The post Dual Monitor & Handle Kit appeared first on PT Murni Solusindo.

• Provides a convenient way to reposition a display—no more touching and smudging the screen!
• Attaches to wide variety of mounts using a 50 x 50 mm, 100 x 100 mm or 200 x 100 mm hole pattern
• Robust design ensures many years of service

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
≤32” *	–	–	–	–	–	–	5 years

• Part Number: 97-760-009
• Description: Monitor Handle Kit (black)
• Includes handle, interface plate, mounting hardware
• * Compatible with monitor screens up to 32″ in size or larger, depending on outside height of the display. When VESA hole pattern is centered on back of display, the allowable maximum outside height of the display = 19″ (48 cm)
• This kit adds an additional 2.9 lbs (1.3 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 2.9 lbs (1.3 kg)
• Attaches to mounts with four-hole interface of 50 x 50 mm, 100 x 100 mm or 200 x 100 mm
• Shipping Dimensions: 13.8″ x 13.5″ x 7″ (35 x 34 x 18 cm)
• Shipping Weight: 5.3 lbs (4.2 kg)
• Warranty: Five years

The post Monitor Handle Kit appeared first on PT Murni Solusindo.

• Perfect dual-mounting solution for monitors with screen sizes of 17″ to 24″
• Attaches to wide variety of mounts using a 50 x 50 mm or 100 x 100 mm hole pattern
• Robust design ensures many years of service
• Conceal and organize cables: Display cables can be neatly routed behind displays

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
17″ – 26″ *	≤36 lbs ≤16.3 kg †	–	–	–	360°	MIS-D	5 years

• Part Number: 97-783
• Description: Dual Monitor & Handle Kit (black)
• Includes bow, two mounting brackets, handle, mounting hardware
• * Outside width of monitor should be 14″ to 24.5″ (35 to 62 cm). This range accommodates most 17″ to 24″ displays as well as some displays as large as 26″. If the outside width is less than 14″ (35 cm), a small gap will be present between the two displays. Displays with an outside width greater than 24.5″ (62 cm) are not compatible
• † This kit adds an additional 6 lbs (2.7 kg) to your mounting solution. Your mounting solution’s weight capacity must be reduced by 6 lbs (2.7 kg) when using standard monitors less than or equal to 2.5″ (64 mm) thick. Additional reduction may be required if monitors are greater than 2.5″ (64 mm) thick. Exception: When used as a replacement bow on WorkFit Dual products, there is no reduction in capacity. Combined weight of displays can be no more than 36 lbs (16.4 kg)—in no circumstances should displays exceed this weight
• Attaches to mounts with four-hole interface of 50 x 50 mm or 100 x 100 mm
• Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• This kit can be installed and used without the included handle
• Product Dimensions: 4″H x 29.1″W x 1.5″D (10 x 74 x 38 cm)
• Shipping Dimensions: 31″ x 13.5″ x 7″ (79 x 34 x 17.5 cm)
• Shipping Weight: 8.4 lbs (3.8 kg)
• Warranty: Five years

The post Dual Monitor & Handle Kit appeared first on PT Murni Solusindo.

• Allows a second LX Sit-Stand Arm to be attached at any point on the pole of an installed base
• Simple installation
• Easily reposition height on pole by loosening/tightening collar’s set-screws

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
–	–	–	–	–	–	–	10 years

• Part Number: 97-844
• Description: LX Pole Collar for LX Sit-Stand Desk Mount Arms
• Includes 40 mm pole collar, two set screws, hex wrench
• Inner diameter: 40 mm
• Not compatible with standard LX arms
• No more than two arms should be installed per base
• When adding a second arm to the LX HD Sit-Stand Arm’s pole using a desk-clamp base, weight capacity is reduced to 25 lbs (11.3 kg) per arm. Weight capacity remains 30 lbs (13.6 kg) per arm using a grommet-mount base
• Shipping Dimensions: 9″ x 5″ mailer (23 x 13 cm)
• Shipping Weight: 0.5 lbs (0.2 kg)
• Warranty: Ten years

The post LX Pole Collar appeared first on PT Murni Solusindo.

• Extra flexibility

Increases the arm’s reach to fit more users and applications

• Durable design

Aluminum construction is built to last

• Neat workspace

Cable management routes cables under the arm, out of the way

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
–	–	–	–	–	–	–	10 years

• Part Number: 45-289-026 (polished aluminum); 45-289-216 (white); 45-289-224 (matte black)
• Description: LX Extension
• Includes 9-inch extension, end cap
• Only one additional extension is allowed per LX configuration
• Not recommended for use with LX dual monitor arms
• IMPORTANT: Adding this extension to your mount may reduce its weight capacity. When used with the LX Desk Monitor Arm, weight capacity is reduced to 18 lbs (8.1 kg); when used with the LX HD Wall Mount Swing Arm, weight capacity is reduced to 36 lbs (16.4 kg)
• For LX Sit-Stand Arms, choose the LX Sit-Stand Extension (45-362-026)
• Product Weight: 1.1 lbs (.5 kg)
• Shipping Dimensions: 12″H x 4″W x 2.3″D (31 x 10 x 6 cm)
• Shipping Weight: 1.5 lbs (.6 kg)
• Warranty: Ten years

The post LX Extension appeared first on PT Murni Solusindo.

• Increases the reach of an LX Sit-Stand Keyboard Arm or Interactive Arm LD
• Adds another pivot-point for more adjustment flexibility
• Cable management feature routes cables under the arm, out of the way

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
–	–	–	–	–	–	–	10 years

• Part Number: 45-362-026
• Description: LX Sit-Stand Extension (polished aluminum)
• Not compatible with standard LX Arms; not recommended for use with LX Sit-Stand LCD Arms.
  For use with the LX Sit-Stand Keyboard Arm and the Interactive Arm LD
• Extends the reach of an arm by 11.7″ (30 cm)
• Product Weight: 2.4 lbs (1.1 kg)
• Shipping Dimensions: 17.7″ x 7.1″ x 3.9″ (45 x 18 x 10 cm)
• Shipping Weight: 3.3 lbs (1.5 kg)
• Warranty: Ten (10) years

The post LX Sit-Stand Extension appeared first on PT Murni Solusindo.

• Boost productivity

Quickly view multiple files and data for more efficient working

• Neat workspace

Cable management routes cables under the arm, out of the way

• Quality design

Built for thousands of movements by passing 10,000-cycle test

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
–	7–25 lbs 3.2–11.3 kg *	13″ 33.0 cm *	75°	360°	360°	MIS-D	10 years

• Part Numbers: 98-130-224 (matte black), 98-130-216 (white with grey accents), 97-940-026 (polished aluminum with black accents)
• Description: LX Arm, Extension and Collar Kit
• Includes LX arm, extension, pole collar, cap, attachment hardware
• Can be configured to hold a laptop instead of an LCD display; also order the accessory Notebook Tray (50-193-200)
• * Weight Capacity: 7 to 25 lbs (3.1 to 11.3 kg). With monitors greater than 20 lbs (9.1 kg) in weight, the vertical range of motion may be reduced up to 4.5″ (11 cm) for a total height range of 8.5″ (22 cm)
• Note: In multi-monitor configurations, maximum weight capacity may be reduced—see parent product for details
• Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
• Quality Tested: 10,000-cycle test applied to lift mechanism, ensuring years of trouble-free height adjustment
• Arm can be used with or without Extension; attaches directly to pole or at end of Extension
• This kit is not compatible with LX Sit-Stand Arm systems
• Product Weight: 4.3 lbs (2 kg)
• Shipping Dimensions: 17.5″ x 7.75″ x 6.5″ (44 x 20 x 17 cm)
• Shipping Weight: 5 lbs (2.3 kg)
• Warranty: Ten years

The post LX Arm, Extension and Collar Kit appeared first on PT Murni Solusindo.

• Provides a fixed 180-degree stop
• Prevents the extension arms from hitting the wall
• Easily attaches to the pole and secured in place with two set screws to prevent stop rotation

Spesifications

Screen	Capacity	Lift	Tilt	Pan	Rotation	Vesa	Warranty
–	–	–	–	–	–	–	10 years

• Part Number: 98-060-003
• Description: LX Two-Stop Rotation Control Kit (anodized silver)
• Includes dual rotation stop collar, two (2) stop posts, set screws and hex wrench
• Mounts directly to a 35 mm diameter pole
• Note: Not compatible with the LX Dual Side by Side Arms (45-245-026, 45-491-216) or LX Sit-Stand Arms (45-360-026. 45-384-026)
• Product Weight: 0.4 lbs (0.19 kg)
• Shipping Dimensions: 9″ x 7″ x 0.8″ (23 x 18 x 2 cm)
• Shipping Weight: 0.5 lbs (0.22 kg)
• Warranty: Ten (10) years

The post LX Two-Stop Rotation Control Kit appeared first on PT Murni Solusindo.