Find Best - Mobile Carts

StyleView® Cart with LCD Pivot, 9 Drawers (3×3)

Fri, 04 Aug 2023 07:37:31 +0000

Benefits

Auto-locking drawer system: simple and efficient medication management at the point-of-care reduces opportunities for errors
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Effortlessly maneuver the cart to the point of need—StyleView quickly responds to caregivers’ touch and enables nurses to focus on their patients
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates multiple configurations: closed notebooks with monitor, CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Keyboard pans fully side-to-side for closer access while interacting with clients
Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤24“

≤37 lbs
≤16.8 kg *

21“
53.3 cm †

25°

24°

90° ‡

MIS-D

5 years

Part Number: SV43-1390-0
Description: StyleView Cart with LCD Pivot, non-powered, 9 Drawers (3 small drawers x 3 rows)
Includes LCD pivot, primary triple drawer, two supplemental triple drawers, drawer dividers, travel stop, worksurface, CPU lock, secure CPU compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, left/right mouse tray, rear handle, storage basket, cable storage, four casters (two locking)
* Total maximum load on height-adjustment assembly = 37 lbs (16.8 kg). This is the sum of the following components: LCD pivot = 5–14 lbs (2.3–6.4 kg); worksurface ≤ 5 lbs (2.2 kg); keyboard tray ≤ 2 lbs (1 kg); CPU compartment ≤ 13 lbs (5.9 kg); small drawer ≤ .25 lbs (.1 kg)
Note: Locking the height of the LCD lift pivot changes the weight capacity to ≤ 20 lbs (9.1 kg), allowing it to accommodate heavier displays and all-in-one computers—contact Ergotron for details
Note: If the combined LCD and CPU weight is greater than 27 lbs (12.3 kg) then the CPU must be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately)
† LCD and worksurface adjust 16″ (41 cm) in tandem; LCD Pivot adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 21″ (53 cm)
‡ Portrait screen orientation may be incompatible with widescreen displays > 19″
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters, height adjustment, LCD tilt and pan all require just a touch
Actual cart weight is just 92 lbs (41.8 kg), making system relocation easy

Safe

Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Tested to UL/EN/IEC and FCC Part 15 Class A specifications for enhanced patient safety
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for closed notebook, thin client or CPU. Keys and locks are heavy-duty
Front-locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

Covered by Global Service Program—24/7 coverage

All the Details Covered

Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
Ships fully assembled
Quick, easy access to CPU storage compartment: One-hand operation of secure latch with slide-out worksurface ensures easy access. Security cable in compartment deters CPU theft
Four-port USB hub
Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four (4) ultra-smooth gliding casters for extremely easy push/pull mobility; two locking casters ensure lock-in-place stability

Compatibility and Dimensions

Internal Dimensions: individual small drawer = 2.5″H x 3.75″W x 10.5″D (63.5 x 95 x 267 mm)—includes dividers to configure up to 4 compartments
Open-architecture design accommodates multiple configurations, closed notebooks with monitor (even widescreen with up to 17.3″ diagonal size), CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 4″H (45 x 37.5 x 10.1 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 17″ x 21″ (430 x 533 mm)
Worksurface Dimensions: 22.4″W x 19.75″D (567 x 502 mm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 53″D x 34″W x 36″H (135 x 89 x 91 cm)
Shipping Weight: 127 lbs (57.7 kg); actual cart weight = 92 lbs (41.8 kg)
Warranty: Five (5) years

The post StyleView® Cart with LCD Pivot, 9 Drawers (3×3) appeared first on PT Murni Solusindo.

StyleView® Cart with LCD Pivot, 2 Drawers (2×1)

Fri, 04 Aug 2023 07:23:51 +0000

Benefits

Auto-locking drawer system: simple and efficient medication management at the point-of-care reduces opportunities for errors
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Effortlessly maneuver the cart to the point of need—StyleView quickly responds to caregivers’ touch and enables nurses to focus on their patients
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates multiple configurations: closed notebooks with monitor, CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Keyboard pans fully side-to-side for closer access while interacting with clients
Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤24“

≤37 lbs
≤16.8 kg *

25“
63.5 cm †

25°

24°

90° ‡

MIS-D

5 years

Part Number: SV43-13A0-0
Description: StyleView Cart with LCD Pivot, non-powered, 2 Drawers (2 medium drawers x 1 row)
Includes LCD pivot, primary double drawer, drawer dividers, worksurface, CPU lock, secure CPU compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, left/right mouse tray, rear handle, storage basket, cable storage, four casters (two locking)
* Total maximum load on height-adjustment assembly = 37 lbs (16.8 kg). This is the sum of the following components: LCD pivot = 5–14 lbs (2.3–6.4 kg); worksurface ≤ 5 lbs (2.2 kg); keyboard tray ≤ 2 lbs (1 kg); CPU compartment ≤ 13 lbs (5.9 kg); medium drawer ≤ 1 lbs (.5 kg)
Note: Locking the height of the LCD lift pivot changes the weight capacity to ≤ 20 lbs (9.1 kg), allowing it to accommodate heavier displays and all-in-one computers—contact Ergotron for details
Note: If the combined LCD and CPU weight is greater than 27 lbs (12.3 kg) then the CPU must be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately)
† LCD and worksurface adjust 20″ (51 cm) in tandem; LCD Pivot adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 25″ (63 cm)
‡ Portrait screen orientation may be incompatible with widescreen displays > 19″
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters, height adjustment, LCD tilt and pan all require just a touch
Actual cart weight is just 79 lbs (35.8 kg), making system relocation easy

Safe

Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Tested to UL/EN/IEC and FCC Part 15 Class A specifications for enhanced patient safety
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for closed notebook, thin client or CPU. Keys and locks are heavy-duty
Front-locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

Covered by Global Service Program—24/7 coverage

All the Details Covered

Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
Ships fully assembled
Quick, easy access to CPU storage compartment: One-hand operation of secure latch with slide-out worksurface ensures easy access. Security cable in compartment deters CPU theft
Four-port USB hub
Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four (4) ultra-smooth gliding casters for extremely easy push/pull mobility; two locking casters ensure lock-in-place stability

Compatibility and Dimensions

Internal Dimensions: medium drawer = 2.5″H x 5.5″W x 10.5″D (63.5 x 140 x 267 mm)—includes dividers to configure up to 4 compartments
Open-architecture design accommodates multiple configurations, closed notebooks with monitor (even widescreen with up to 17.3″ diagonal size), CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 4″H (45 x 37.5 x 10.1 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 17″ x 21″ (430 x 533 mm)
Worksurface Dimensions: 22.4″W x 19.75″D (567 x 502 mm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 53″D x 34″W x 36″H (135 x 89 x 91 cm)
Shipping Weight: 105 lbs (47.6 kg); actual cart weight = 79 lbs (35.8 kg)
Warranty: Five (5) years for mechanical components, one (1) year for electrical components

The post StyleView® Cart with LCD Pivot, 2 Drawers (2×1) appeared first on PT Murni Solusindo.

StyleView® Cart with LCD Pivot, 2 Tall Drawers (2×1)

Fri, 04 Aug 2023 07:10:00 +0000

Benefits

Auto-locking drawer system: simple and efficient medication management at the point-of-care reduces opportunities for errors; security system stores variable-length PINs for up to 1,000 users with StyleLink software (100 users without StyleLink)
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Effortlessly maneuver the cart to the point of need—StyleView quickly responds to caregivers’ touch and enables nurses to focus on their patients
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates multiple configurations: closed notebooks with monitor, CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Keyboard pans fully side-to-side for closer access while interacting with clients
Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤24“

≤37 lbs
≤16.8 kg *

25“
63.5 cm †

25°

24°

90° ‡

MIS-D

5 years

Part Number: SV43-13C0-0
Description: StyleView Cart with LCD Pivot, non-powered, 2 Tall Drawers (2 medium tall drawers x 1 row)
Includes LCD pivot, primary double tall drawer, drawer dividers, worksurface, CPU lock, secure CPU compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, left/right mouse tray, rear handle, storage basket, cable storage, four casters (two locking)
* Total maximum load on height-adjustment assembly = 37 lbs (16.8 kg). This is the sum of the following components: LCD pivot = 5–14 lbs (2.3–6.4 kg); worksurface ≤ 5 lbs (2.2 kg); keyboard tray ≤ 2 lbs (1 kg); CPU compartment ≤ 13 lbs (5.9 kg); medium drawer ≤ 1 lbs (.5 kg)
Note: Locking the height of the LCD lift pivot changes the weight capacity to ≤ 20 lbs (9.1 kg), allowing it to accommodate heavier displays and all-in-one computers—contact Ergotron for details
Note: If the combined LCD and CPU weight is greater than 27 lbs (12.3 kg) then the CPU must be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately)
† LCD and worksurface adjust 20″ (51 cm) in tandem; LCD Pivot adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 25″ (63 cm)
‡ Portrait screen orientation may be incompatible with widescreen displays > 19″
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters, height adjustment, LCD tilt and pan all require just a touch
Actual cart weight is just 79 lbs (35.8 kg), making system relocation easy

Safe

Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Tested to UL/EN/IEC and FCC Part 15 Class A specifications for enhanced patient safety
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for closed notebook, thin client or CPU. Keys and locks are heavy-duty
Front-locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

Covered by Global Service Program—24/7 coverage

All the Details Covered

Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
Ships fully assembled
Quick, easy access to CPU storage compartment: One-hand operation of secure latch with slide-out worksurface ensures easy access. Security cable in compartment deters CPU theft
Four-port USB hub
Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four (4) ultra-smooth gliding casters for extremely easy push/pull mobility; two locking casters ensure lock-in-place stability

Compatibility and Dimensions

Internal Dimensions: medium tall drawer = 6″H x 12″W x 10.5″D (150 x 305 x 267 mm)—includes dividers to configure up to 4 compartments
Open-architecture design accommodates multiple configurations, closed notebooks with monitor (even widescreen with up to 17.3″ diagonal size), CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 4″H (45 x 37.5 x 10.1 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 17″ x 21″ (430 x 533 mm)
Worksurface Dimensions: 22.4″W x 19.75″D (567 x 502 mm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 53″D x 34″W x 36″H (135 x 89 x 91 cm)
Shipping Weight: 105 lbs (47.6 kg); actual cart weight = 79 lbs (35.8 kg)
Warranty: Five (5) years for mechanical components, one (1) year for electrical components

The post StyleView® Cart with LCD Pivot, 2 Tall Drawers (2×1) appeared first on PT Murni Solusindo.

StyleView® Cart with HD Pivot, 3 Drawers (1×3)

Fri, 04 Aug 2023 02:53:39 +0000

Benefits

Heavy-duty pivot supports larger monitors and all-in-one computers
Lowers the user-force required to lift head-unit assembly when loaded to capacity
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Effortlessly maneuver the cart to the point of need—StyleView quickly responds to caregivers’ touch and enables nurses to focus on their patients
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates multiple configurations: closed notebooks with monitor, CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Keyboard pans fully side-to-side for closer access while interacting with clients
Passes Ergotron’s 25,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤24“

20–37 lbs
9.1–16.8 kg *

21“
53.3 cm †

25°

24°

90° ‡

MIS-D

5 years

Part Number: SV43-2530-0
Description: StyleView Cart with HD Pivot, non-powered, 3 Drawers (1 large drawer x 3 rows)
Includes HD pivot, primary single drawer, two supplemental single drawers, drawer dividers, travel stop, worksurface, CPU lock, secure CPU compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, left/right mouse tray, rear handle, storage basket, cable storage, four casters (two locking)
* Total maximum load on height-adjustment assembly = 37 lbs (16.8 kg). This is the sum of the following components: LCD pivot = 14–24 lbs (6.4–10.9 kg); worksurface ≤ 5 lbs (2.2 kg); keyboard tray ≤ 2 lbs (1 kg); CPU compartment ≤ 13 lbs (5.9 kg); large drawer ≤ 2 lbs (1 kg). A minimum load of 20 lbs (9.07 kg) is recommended
Note: If the combined LCD and CPU weight is greater than 27 lbs (12.3 kg) then the CPU must be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately)
† LCD and worksurface adjust 16″ (41 cm) in tandem; LCD Pivot adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 21″ (53 cm)
‡ Portrait screen orientation may be incompatible with widescreen displays > 19″
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters, height adjustment, LCD tilt and pan all require just a touch
Actual cart weight is just 92 lbs (41.8 kg), making system relocation easy

Safe

Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Tested to UL/EN/IEC and FCC Part 15 Class A specifications for enhanced patient safety
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for closed notebook, thin client or CPU. Keys and locks are heavy-duty
Front-locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

Covered by Global Service Program—24/7 coverage
StyleLink software available with an upgraded service package

All the Details Covered

Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
Ships fully assembled
Quick, easy access to CPU storage compartment: One-hand operation of secure latch with slide-out worksurface ensures easy access. Security cable in compartment deters CPU theft
Four-port USB hub
Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four (4) ultra-smooth gliding casters for extremely easy push/pull mobility; two locking casters ensure lock-in-place stability

Compatibility and Dimensions

Internal Dimensions: large drawer = 2.5″H x 12″W x 10.5″D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments
Open-architecture design accommodates multiple configurations, closed notebooks with monitor (even widescreen with up to 17.3″ diagonal size), CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 4″H (45 x 37.5 x 10.1 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 17″ x 21″ (430 x 533 mm)
Worksurface Dimensions: 22.4″W x 19.75″D (567 x 502 mm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 56″D x 24.5″W x 34″H (142 x 62 x 86 cm)
Shipping Weight: 120 lbs (54.5 kg); actual cart weight = 92 lbs (41.8 kg)
Warranty: Five (5) years for mechanical components, one (1) year for electrical components

The post StyleView® Cart with HD Pivot, 3 Drawers (1×3) appeared first on PT Murni Solusindo.

StyleView® Cart with HD Pivot, 5 Drawers (1×2+3)

Fri, 04 Aug 2023 02:34:04 +0000

Benefits

Heavy-duty pivot supports larger monitors and all-in-one computers
Lowers the user-force required to lift head-unit assembly when loaded to capacity
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Effortlessly maneuver the cart to the point of need—StyleView quickly responds to caregivers’ touch and enables nurses to focus on their patients
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates multiple configurations: closed notebooks with monitor, CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Keyboard pans fully side-to-side for closer access while interacting with clients
Passes Ergotron’s 25,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤24“

20–37 lbs
9.1–16.8 kg *

21“
53.3 cm †

25°

24°

90° ‡

MIS-D

5 years

Part Number: SV43-2550-0
Description: StyleView Cart with HD Pivot, non-powered, 5 Drawers (1 large drawer x 2 rows + 3 small drawers x 1 row)
Includes HD pivot, primary single drawer, one supplemental single drawer, one supplemental triple drawer, drawer dividers, travel stop, worksurface, CPU lock, secure CPU compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, left/right mouse tray, rear handle, storage basket, cable storage, four casters (two locking)
* Total maximum load on height-adjustment assembly = 37 lbs (16.8 kg). This is the sum of the following components: LCD pivot = 14–24 lbs (6.4–10.9 kg); worksurface ≤ 5 lbs (2.2 kg); keyboard tray ≤ 2 lbs (1 kg); CPU compartment ≤ 13 lbs (5.9 kg); large drawer ≤ 2 lbs (1 kg). A minimum load of 20 lbs (9.07 kg) is recommended
Note: If the combined LCD and CPU weight is greater than 27 lbs (12.3 kg) then the CPU must be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately)
† LCD and worksurface adjust 16″ (41 cm) in tandem; LCD Pivot adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 21″ (53 cm)
‡ Portrait screen orientation may be incompatible with widescreen displays > 19″
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters, height adjustment, LCD tilt and pan all require just a touch
Actual cart weight is just 92 lbs (41.8 kg), making system relocation easy

Safe

Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Tested to UL/EN/IEC and FCC Part 15 Class A specifications for enhanced patient safety
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for closed notebook, thin client or CPU. Keys and locks are heavy-duty
Front-locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

Covered by Global Service Program—24/7 coverage
StyleLink software available with an upgraded service package

All the Details Covered

Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
Ships fully assembled
Quick, easy access to CPU storage compartment: One-hand operation of secure latch with slide-out worksurface ensures easy access. Security cable in compartment deters CPU theft
Four-port USB hub
Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four (4) ultra-smooth gliding casters for extremely easy push/pull mobility; two locking casters ensure lock-in-place stability

Compatibility and Dimensions

Internal Dimensions: individual small drawer = 2.5″H x 3.75″W x 10.5″D (63.5 x 95 x 267 mm)—includes dividers to configure up to 4 compartments; large drawer = 2.5″H x 12″W x 10.5″D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments
Open-architecture design accommodates multiple configurations, closed notebooks with monitor (even widescreen with up to 17.3″ diagonal size), CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 4″H (45 x 37.5 x 10.1 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 17″ x 21″ (430 x 533 mm)
Worksurface Dimensions: 22.4″W x 19.75″D (567 x 502 mm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 56″D x 24.5″W x 34″H (142 x 62 x 86 cm)
Shipping Weight: 120 lbs (54.5 kg); actual cart weight = 92 lbs (41.8 kg)
Warranty: Five (5) years for mechanical components, one (1) year for electrical components

The post StyleView® Cart with HD Pivot, 5 Drawers (1×2+3) appeared first on PT Murni Solusindo.

StyleView® Cart with HD Pivot, 7 Drawers (1+3×2)

Thu, 03 Aug 2023 07:53:45 +0000

Benefits

Heavy-duty pivot supports larger monitors and all-in-one computers
Lowers the user-force required to lift head-unit assembly when loaded to capacity
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Effortlessly maneuver the cart to the point of need—StyleView quickly responds to caregivers’ touch and enables nurses to focus on their patients
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates multiple configurations: closed notebooks with monitor, CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Keyboard pans fully side-to-side for closer access while interacting with clients
Passes Ergotron’s 25,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤24“

20–37 lbs
9.1–16.8 kg *

21“
53.3 cm †

25°

24°

90° ‡

MIS-D

5 years

Part Number: SV43-2570-0
Description: StyleView Cart with HD Pivot, non-powered, 7 Drawers (1 large drawer + 3 small drawers x 2 rows)
Includes HD pivot, primary single drawer, two supplemental triple drawers, drawer dividers, travel stop, worksurface, CPU lock, secure CPU compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, left/right mouse tray, rear handle, storage basket, cable storage, four casters (two locking)
* Total maximum load on height-adjustment assembly = 37 lbs (16.8 kg). This is the sum of the following components: LCD pivot = 14–24 lbs (6.4–10.9 kg); worksurface ≤ 5 lbs (2.2 kg); keyboard tray ≤ 2 lbs (1 kg); CPU compartment ≤ 13 lbs (5.9 kg); large drawer ≤ 2 lbs (1 kg). A minimum load of 20 lbs (9.07 kg) is recommended
Note: If the combined LCD and CPU weight is greater than 27 lbs (12.3 kg) then the CPU must be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately)
† LCD and worksurface adjust 16″ (41 cm) in tandem; LCD Pivot adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 21″ (53 cm)
‡ Portrait screen orientation may be incompatible with widescreen displays > 19″
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters, height adjustment, LCD tilt and pan all require just a touch
Actual cart weight is just 92 lbs (41.8 kg), making system relocation easy

Safe

Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Tested to UL/EN/IEC and FCC Part 15 Class A specifications for enhanced patient safety
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for closed notebook, thin client or CPU. Keys and locks are heavy-duty
Front-locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

Covered by Global Service Program—24/7 coverage
StyleLink software available with an upgraded service package

All the Details Covered

Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
Ships fully assembled
Quick, easy access to CPU storage compartment: One-hand operation of secure latch with slide-out worksurface ensures easy access. Security cable in compartment deters CPU theft
Four-port USB hub
Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four (4) ultra-smooth gliding casters for extremely easy push/pull mobility; two locking casters ensure lock-in-place stability

Compatibility and Dimensions

Internal Dimensions: individual small drawer = 2.5″H x 3.75″W x 10.5″D (63.5 x 95 x 267 mm)—includes dividers to configure up to 4 compartments; large drawer = 2.5″H x 12″W x 10.5″D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments
Open-architecture design accommodates multiple configurations, closed notebooks with monitor (even widescreen with up to 17.3″ diagonal size), CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 4″H (45 x 37.5 x 10.1 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 17″ x 21″ (430 x 533 mm)
Worksurface Dimensions: 22.4″W x 19.75″D (567 x 502 mm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 56″D x 24.5″W x 34″H (142 x 62 x 86 cm)
Shipping Weight: 120 lbs (54.5 kg); actual cart weight = 92 lbs (41.8 kg)
Warranty: Five (5) years for mechanical components, one (1) year for electrical components

The post StyleView® Cart with HD Pivot, 7 Drawers (1+3×2) appeared first on PT Murni Solusindo.

StyleView® Cart with HD Pivot, 9 Drawers (3×3)

Thu, 03 Aug 2023 07:36:27 +0000

Benefits

Heavy-duty pivot supports larger monitors and all-in-one computers
Lowers the user-force required to lift head-unit assembly when loaded to capacity
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Effortlessly maneuver the cart to the point of need—StyleView quickly responds to caregivers’ touch and enables nurses to focus on their patients
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates multiple configurations: closed notebooks with monitor, CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Keyboard pans fully side-to-side for closer access while interacting with clients
Passes Ergotron’s 25,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤24“

20–37 lbs
9.1–16.8 kg *

21“
53.3 cm †

25°

24°

90° ‡

MIS-D

5 years

Part Number: SV43-2590-0
Description: StyleView Cart with HD Pivot, non-powered, 3 Drawers (3 small drawers x 2 rows)
Includes HD pivot, primary triple drawer, two supplemental triple drawers, drawer dividers, travel stop, worksurface, CPU lock, secure CPU compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, left/right mouse tray, rear handle, storage basket, cable storage, four casters (two locking)
* Total maximum load on height-adjustment assembly = 37 lbs (16.8 kg). This is the sum of the following components: LCD pivot = 14–24 lbs (6.4–10.9 kg); worksurface ≤ 5 lbs (2.2 kg); keyboard tray ≤ 2 lbs (1 kg); CPU compartment ≤ 13 lbs (5.9 kg); large drawer ≤ 2 lbs (1 kg). A minimum load of 20 lbs (9.07 kg) is recommended
Note: If the combined LCD and CPU weight is greater than 27 lbs (12.3 kg) then the CPU must be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered separately)
† LCD and worksurface adjust 16″ (41 cm) in tandem; LCD Pivot adjusts 5″ (13 cm) independently; maximum LCD height adjustment = 21″ (53 cm)
‡ Portrait screen orientation may be incompatible with widescreen displays > 19″
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters, height adjustment, LCD tilt and pan all require just a touch
Actual cart weight is just 92 lbs (41.8 kg), making system relocation easy

Safe

Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Tested to UL/EN/IEC and FCC Part 15 Class A specifications for enhanced patient safety
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for closed notebook, thin client or CPU. Keys and locks are heavy-duty
Front-locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

Covered by Global Service Program—24/7 coverage
StyleLink software available with an upgraded service package

All the Details Covered

Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
Ships fully assembled
Quick, easy access to CPU storage compartment: One-hand operation of secure latch with slide-out worksurface ensures easy access. Security cable in compartment deters CPU theft
Four-port USB hub
Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four (4) ultra-smooth gliding casters for extremely easy push/pull mobility; two locking casters ensure lock-in-place stability

Compatibility and Dimensions

Internal Dimensions: large drawer = 2.5″H x 12″W x 10.5″D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments
Open-architecture design accommodates multiple configurations, closed notebooks with monitor (even widescreen with up to 17.3″ diagonal size), CPU and monitor, thin clients, tablets, all-in-one computers and future hardware upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 4″H (45 x 37.5 x 10.1 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 17″ x 21″ (430 x 533 mm)
Worksurface Dimensions: 22.4″W x 19.75″D (567 x 502 mm)
Mounting Standards: VESA FDMI MIS-D, 100/75, C (hole pattern: 100 x 100 mm & 75 x 75 mm)
Shipping Dimensions: 56″D x 24.5″W x 34″H (142 x 62 x 86 cm)
Shipping Weight: 120 lbs (54.5 kg); actual cart weight = 92 lbs (41.8 kg)
Warranty: Five (5) years for mechanical components, one (1) year for electrical components

The post StyleView® Cart with HD Pivot, 9 Drawers (3×3) appeared first on PT Murni Solusindo.

StyleView® Laptop Cart, LiFe Powered, 1 Drawer (1×1)

Thu, 03 Aug 2023 04:03:05 +0000

Benefits

LiFe makes the cart extremely lightweight and easy to move
Ultrafast recharge ensures caregiver and cart uptime: A full recharge from full discharge can be completed in about two hours
Long battery ‘LiFe’ minimizes time and cost for maintenance and replacement
For patient and caregiver safety the entire power system and the FULL cart are certified to UL/EN/IEC 60601-1. Complies with EMI limits of FCC Part 15 Class A
Auto-locking drawer system: simple and efficient medication management at the point-of-care reduces opportunities for errors; security system stores variable-length PINs for up to 1,000 users with StyleLink software (100 users without StyleLink)
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates most laptops—even widescreen with up to 17.3″ diagonal size—easing future hardware deployments and upgrades
Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤17.3” †

≤20 lbs
≤9.1 kg *

20“
50.8 cm

–

5 years

Part Numbers: North America = SV44-1112-1; Europe = SV44-1112-2; United Kingdom/Ireland = SV44-1112-3; Hong Kong/Malaysia/Singapore = SV44-1112-3; Australia/New Zealand = SV44-1112-4; China = SV44-1112-5; India = SV44-1112-B; Switzerland = SV44-1112-C
Description: StyleView Laptop Cart, LiFe Powered, 1 Drawer (1 large drawer x 1 row)
TAA (Trade Agreements Act) compliant
Includes auto-locking drawer system (ADS), primary single drawer, drawer dividers, worksurface, CPU lock, secure laptop compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, keyboard lights, left/right mouse tray, rear handle, storage basket, cable storage, four casters (lockable, 1 tracking function), single-battery 45 Ah LiFe power system, coiled cord, integrated AC outlets, power system user interface
† Maximum Laptop Size: 17″W x 14.75″D x 2″H (432 x 375 x 51 mm)
* Weight Capacity: Total maximum load on height-adjustment assembly = 20 lbs (9.1 kg). This is the sum of the following components: worksurface ≤ 5 lbs (2.3 kg); keyboard tray ≤ 3 lbs (1.4 kg); laptop compartment ≤ 10 lbs (4.5 kg); large drawer ≤ 2 lbs (1 kg)
Laptop and worksurface adjust 20″ (51 cm) in tandem
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters and height adjustment require just a touch

Safe

For patient and caregiver safety the entire power system and the FULL cart are certified to UL/EN/IEC 60601-1 and CAN/CSA-C22.2 No. 60601-1:08. Also complies with EMI limits of FCC Part 15 Class A
Power System User Interface integrated conveniently on the worksurface (includes visual and audible battery status indicator)
Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for open laptop. Keys and locks are heavy-duty
Locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

eKinnex enabled: A cloud-based service that facilitates easy and remote management of your cart fleet
Covered by Global Service Program—24/7 coverage

All the Details Covered

Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
A unique cable management system conceals and organizes cords, making cleaning easy
Ships fully assembled
Notebook screen holders: Prevents the notebook screen from vibration for less damage to hinges over time
Four-port USB hub
Easy access to components for field replacement and serviceability: keyboard LEDs, PC boards (including the user interface). Easier, faster upkeep and service means less down time
Pre-routed cables provide quicker integration with equipment
Power outlets located in the CPU storage compartment
Four ultra-smooth gliding casters for extremely easy push/pull mobility; locking casters ensure lock-in-place stability
Laptop screen slot cover: Protection from large spills on the worksurface while retaining easy access to the laptop’s power button

Compatibility and Dimensions

Internal Dimensions: large drawer = 2.5″H x 12″W x 10.5″D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments; compartment for laptop = 18.3″W x 14.9″D x 2.5″H (466 x 378 x 64 mm)
Open-architecture design accommodates most laptops—even widescreen with up to 17.3″ diagonal size—easing future hardware deployments and upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 3.75″H (45 x 37.5 x 9.5 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 15.5″ x 17″ (394 x 432 mm)
Worksurface Dimensions: 22″W x 19.6″D (562 x 498 mm)
VAC:
SV44-1112-1 = 120V/60Hz
SV44-1112-2 = 230V/50Hz
SV44-1112-3 = 230V/50Hz
SV44-1112-4 = 230V/50Hz
SV44-1112-5 = 220V/50Hz
SV44-1112-B = 230V/50Hz/60Hz
SV44-1112-C = 230V/50Hz
Grounded Plug:
SV44-1112-1 = NEMA 5-15P Hospital Grade
SV44-1112-2 = European CEE 7
SV44-1112-3 = UK BS 1363
SV44-1112-4 = AS/NZS 3112
SV44-1112-5 = GB1002-1; GB2009-1
SV44-1112-B = BS 546
SV44-1112-C = SEV 1011
45Ah, 12V DC, Lithium Iron Phosphate (LiFe) battery

Shipping Dimensions: 24.5″W x 34″D x 56″H (62 x 87 x 142 cm)

Shipping Weight: 148 lbs (67.1 kg); actual cart weight = 113 lbs (51.3 kg)

§ Warranty: Five years on cart’s mechanical components, two years on power module; five years on LiFe battery, including three-year capacity guarantee

The post StyleView® Laptop Cart, LiFe Powered, 1 Drawer (1×1) appeared first on PT Murni Solusindo.

StyleView® Laptop Cart, LiFe Powered, 2 Drawers (1×2)

Thu, 03 Aug 2023 03:50:42 +0000

Benefits

LiFe makes the cart extremely lightweight and easy to move
Ultrafast recharge ensures caregiver and cart uptime: A full recharge from full discharge can be completed in about two hours
Long battery ‘LiFe’ minimizes time and cost for maintenance and replacement
For patient and caregiver safety the entire power system and the FULL cart are certified to UL/EN/IEC 60601-1. Complies with EMI limits of FCC Part 15 Class A
Auto-locking drawer system: simple and efficient medication management at the point-of-care reduces opportunities for errors; security system stores variable-length PINs for up to 1,000 users with StyleLink software (100 users without StyleLink)
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates most laptops—even widescreen with up to 17.3″ diagonal size—easing future hardware deployments and upgrades
Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤17.3” †

≤20 lbs
≤9.1 kg *

20“
50.8 cm

–

5 years

Part Numbers: North America = SV44-1122-1; Europe = SV44-1122-2; United Kingdom/Ireland = SV44-1122-3; Hong Kong/Malaysia/Singapore = SV44-1122-3; Australia/New Zealand = SV44-1122-4; China = SV44-1122-5; India = SV44-1122-B; Switzerland = SV44-1122-C
Description: StyleView Laptop Cart, LiFe Powered, 2 Drawers (1 large drawer x 2 rows)
TAA (Trade Agreements Act) compliant
Includes auto-locking drawer system (ADS), primary single drawer, supplemental single drawer, drawer dividers, worksurface, CPU lock, secure laptop compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, keyboard lights, left/right mouse tray, rear handle, storage basket, cable storage, four casters (lockable, 1 tracking function), single-battery 45 Ah LiFe power system, coiled cord, integrated AC outlets, power system user interface
† Maximum Laptop Size: 17″W x 14.75″D x 2″H (432 x 375 x 51 mm)
* Weight Capacity: Total maximum load on height-adjustment assembly = 22 lbs (10 kg). This is the sum of the following components: worksurface ≤ 5 lbs (2.3 kg); keyboard tray ≤ 3 lbs (1.4 kg); laptop compartment ≤ 10 lbs (4.5 kg); large drawer ≤ 2 lbs (1 kg)
Laptop and worksurface adjust 20″ (51 cm) in tandem
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters and height adjustment require just a touch

Safe

For patient and caregiver safety the entire power system and the FULL cart are certified to UL/EN/IEC 60601-1 and CAN/CSA-C22.2 No. 60601-1:08. Also complies with EMI limits of FCC Part 15 Class A
Power System User Interface integrated conveniently on the worksurface (includes visual and audible battery status indicator)
Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for open laptop. Keys and locks are heavy-duty
Locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

eKinnex enabled: A cloud-based service that facilitates easy and remote management of your cart fleet
Covered by Global Service Program—24/7 coverage

All the Details Covered

Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
A unique cable management system conceals and organizes cords, making cleaning easy
Ships fully assembled
Notebook screen holders: Prevents the notebook screen from vibration for less damage to hinges over time
Four-port USB hub
Easy access to components for field replacement and serviceability: keyboard LEDs, PC boards (including the user interface). Easier, faster upkeep and service means less down time
Pre-routed cables provide quicker integration with equipment
Power outlets located in the CPU storage compartment
Four ultra-smooth gliding casters for extremely easy push/pull mobility; locking casters ensure lock-in-place stability
Laptop screen slot cover: Protection from large spills on the worksurface while retaining easy access to the laptop’s power button

Compatibility and Dimensions

Internal Dimensions: large drawer = 2.5″H x 12″W x 10.5″D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments; compartment for laptop = 18.3″W x 14.9″D x 2.5″H (466 x 378 x 64 mm)
Open-architecture design accommodates most laptops—even widescreen with up to 17.3″ diagonal size—easing future hardware deployments and upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 3.75″H (45 x 37.5 x 9.5 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 15.5″ x 17″ (394 x 432 mm)
Worksurface Dimensions: 22″W x 19.6″D (562 x 498 mm)
VAC:
SV44-1122-1 = 120V/60Hz
SV44-1122-2 = 230V/50Hz
SV44-1122-3 = 230V/50Hz
SV44-1122-4 = 230V/50Hz
SV44-1122-5 = 220V/50Hz
SV44-1122-B = 230V/50Hz/60Hz
SV44-1122-C = 230V/50Hz
Grounded Plug:
SV44-1122-1 = NEMA 5-15P Hospital Grade
SV44-1122-2 = European CEE 7
SV44-1122-3 = UK BS 1363
SV44-1122-4 = AS/NZS 3112
SV44-1122-5 = GB1002-1; GB2009-1
SV44-1122-B = BS 546
SV44-1122-C = SEV 1011
45Ah, 12V DC, Lithium Iron Phosphate (LiFe) battery
Shipping Dimensions: 24.5″W x 34″D x 56″H (62 x 87 x 142 cm)
Shipping Weight: 153 lbs (69.4 kg); actual cart weight = 119 lbs (54 kg)
§ Warranty: Five years on cart’s mechanical components, two years on power module; five years on LiFe battery, including three-year capacity guarantee

The post StyleView® Laptop Cart, LiFe Powered, 2 Drawers (1×2) appeared first on PT Murni Solusindo.

StyleView® Laptop Cart, LiFe Powered, 4 Drawers (3×1+1)

Thu, 03 Aug 2023 03:30:52 +0000

Benefits

LiFe makes the cart extremely lightweight and easy to move
Ultrafast recharge ensures caregiver and cart uptime: A full recharge from full discharge can be completed in about two hours
Long battery ‘LiFe’ minimizes time and cost for maintenance and replacement
For patient and caregiver safety the entire power system and the FULL cart are certified to UL/EN/IEC 60601-1. Complies with EMI limits of FCC Part 15 Class A
Auto-locking drawer system: simple and efficient medication management at the point-of-care reduces opportunities for errors; security system stores variable-length PINs for up to 1,000 users with StyleLink software (100 users without StyleLink)
Drawer system supports “Pharmacy mode,” allowing all drawers to be unlocked simultaneously to facilitate efficient stocking of medication
Extra rows of drawers may be added—up to a maximum of 5 rows
Truly ergonomic design accommodates the largest range of nurses and other caregivers; designed for sitting or standing with single-motion fluid adjustment—helps promote caregiver wellness and productivity
StyleView’s small footprint, with ultra-smooth gliding casters, travels easily across crowded carpet or hard surface floors and is perfect for space constrained areas
Open-architecture design accommodates most laptops—even widescreen with up to 17.3″ diagonal size—easing future hardware deployments and upgrades
Passes Ergotron’s 10,000-cycle motion test, which ensures years of trouble-free sit-to-stand height adjustment

Spesifications

Screen

Capacity

Lift

Tilt

Pan

Rotation

Vesa

Warranty

≤17.3” †

≤21 lbs
≤9.5 kg *

20“
50.8 cm

–

5 years

Part Numbers: North America = SV44-1142-1; Europe = SV44-1142-2; United Kingdom/Ireland = SV44-1142-3; Hong Kong/Malaysia/Singapore = SV44-1142-3; Australia/New Zealand = SV44-1142-4; China = SV44-1142-5; India = SV44-1142-B; Switzerland = SV44-1142-C
Description: StyleView Laptop Cart, LiFe Powered, 4 Drawers (3 small drawers x 1 row + 1 large drawer)
TAA (Trade Agreements Act) compliant
Includes auto-locking drawer system (ADS), primary triple drawer, supplemental single drawer, drawer dividers, worksurface, CPU lock, secure laptop compartment, four-port USB hub, scanner holder bracket, mouse holder, wrist rest, back-tilt keyboard tray, keyboard lights, left/right mouse tray, rear handle, storage basket, cable storage, four casters (lockable, 1 tracking function), single-battery 45 Ah LiFe power system, coiled cord, integrated AC outlets, power system user interface
† Maximum Laptop Size: 17″W x 14.75″D x 2″H (432 x 375 x 51 mm)
* Weight Capacity: Total maximum load on height-adjustment assembly = 21 lbs (9.5 kg). This is the sum of the following components: worksurface ≤ 5 lbs (2.3 kg); keyboard tray ≤ 3 lbs (1.4 kg); laptop compartment ≤ 10 lbs (4.5 kg); large drawer ≤ 2 lbs (1 kg); small drawer ≤ .25 lbs (.1 kg)
Laptop and worksurface adjust 20″ (51 cm) in tandem
Cart may be fitted with up to five rows of standard-height drawers. Vertical adjustment range is affected by the number of drawer rows: 0–2 rows = 20″ (51 cm); 3 rows = 16″ (41 cm ); 4 rows = 12″ (30 cm); 5 rows = 8″ (20 cm)
Cart may be fitted with up to three rows of tall drawers

True Ergonomics

Ergonomic back-tilt keyboard tray with left or right mouse tray ensures wrists remain in a neutral position during data entry—avoid repetitive-stress injuries while increasing comfort and productivity
Designed for users 5’0″ to 6’1″ (152 to 185 cm) tall and for prolonged sitting or standing applications. The exceptional height adjustment range means shorter and taller users can work comfortably and productively in a seated as well as standing position
Patented CF™ lift-and-pivot motion technology minimizes forces required to adjust cart position: Casters and height adjustment require just a touch

Safe

For patient and caregiver safety the entire power system and the FULL cart are certified to UL/EN/IEC 60601-1 and CAN/CSA-C22.2 No. 60601-1:08. Also complies with EMI limits of FCC Part 15 Class A
Power System User Interface integrated conveniently on the worksurface (includes visual and audible battery status indicator)
Surfaces are treated with antimicrobial for product protection; handles are smooth and continuous for improved cleanability
Environmentally clean: RoHS, REACH, WEEE and EU (94/62/EC) packaging compliant
Durable, easy-to-clean exterior composed of aluminum, high-grade plastic and zinc-plated steel promotes infection control
Large, smooth worksurface; easy-to-clean design promotes infection control
Lockable, ventilated enclosed storage for open laptop. Keys and locks are heavy-duty
Locking casters
CPU lock provided inside the storage compartment for additional security
Designed to meet guidelines established by the American National Standards Institute for computer use

Service

eKinnex enabled: A cloud-based service that facilitates easy and remote management of your cart fleet
Covered by Global Service Program—24/7 coverage

All the Details Covered

Drawer dividers are included, allowing compartments to be customized to match your workflow requirements
Four amber LEDs provide light over keyboard tray; includes 15-minute auto shut-off
Button for LED lights is located conveniently on worksurface
Rear basket keeps task-related items where they can be quickly accessed
Universal mounting slot for accessories and equipment
A unique cable management system conceals and organizes cords, making cleaning easy
Ships fully assembled
Notebook screen holders: Prevents the notebook screen from vibration for less damage to hinges over time
Four-port USB hub
Easy access to components for field replacement and serviceability: keyboard LEDs, PC boards (including the user interface). Easier, faster upkeep and service means less down time
Pre-routed cables provide quicker integration with equipment
Power outlets located in the CPU storage compartment
Four ultra-smooth gliding casters for extremely easy push/pull mobility; locking casters ensure lock-in-place stability
Laptop screen slot cover: Protection from large spills on the worksurface while retaining easy access to the laptop’s power button

Compatibility and Dimensions

Internal Dimensions: individual small drawer = 2.5″H x 3.75″W x 10.5″D (63.5 x 95 x 267 mm)—includes dividers to configure up to 4 compartments; large drawer = 2.5″H x 12″W x 10.5″D (63.5 x 305 x 267 mm)—includes dividers to configure up to 16 compartments; compartment for laptop = 18.3″W x 14.9″D x 2.5″H (466 x 378 x 64 mm)
Open-architecture design accommodates most laptops—even widescreen with up to 17.3″ diagonal size—easing future hardware deployments and upgrades
Storage compartment for closed notebook, thin client or CPU: 17.75″W x 14.75″D x 3.75″H (45 x 37.5 x 9.5 cm); larger computers can mount to rear of cart with Universal CPU Holder accessory (ordered separately)
Compact Wheel-to-Wheel Base Dimensions: 15.5″ x 17″ (394 x 432 mm)
Worksurface Dimensions: 22″W x 19.6″D (562 x 498 mm)
VAC:
SV44-1142-1 = 120V/60Hz
SV44-1142-2 = 230V/50Hz
SV44-1142-3 = 230V/50Hz
SV44-1142-4 = 230V/50Hz
SV44-1142-5 = 220V/50Hz
SV44-1142-B = 230V/50Hz/60Hz
SV44-1142-C = 230V/50Hz
Grounded Plug:
SV44-1142-1 = NEMA 5-15P Hospital Grade
SV44-1142-2 = European CEE 7
SV44-1142-3 = UK BS 1363
SV44-1142-4 = AS/NZS 3112
SV44-1142-5 = GB1002-1; GB2009-1
SV44-1142-B = BS 546
SV44-1142-C = SEV 1011
45Ah, 12V DC, Lithium Iron Phosphate (LiFe) battery
Shipping Dimensions: 24.5″W x 34″D x 56″H (62 x 87 x 142 cm)
Shipping Weight: 153 lbs (69.4 kg); actual cart weight = 119 lbs (54 kg)
§ Warranty: Five years on cart’s mechanical components, two years on power module; five years on LiFe battery, including three-year capacity guarantee

The post StyleView® Laptop Cart, LiFe Powered, 4 Drawers (3×1+1) appeared first on PT Murni Solusindo.